dmesg - 4 x Intel Xeon E5-2670 v3 - Cirrus Logic GD 5446 -
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.32-696.16.1.el6.x86_64 (mockbuild@c1bl.rdu2.centos.org) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-18) (GCC) ) #1 SMP Wed Nov 15 16:51:15 UTC 2017
Command line: ro root=/dev/mapper/vg_rrxserver-vg_rrxserver_lv_root rd_LVM_LV=vg_rrxserver/vg_rrxserver_lv_root rd_NO_LUKS rd_LVM_LV=vg_rrxserver/vg_rrxserver_lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=auto KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM LANG=en_US.UTF-8 rhgb quiet
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 00000000bffdc000 (usable)
BIOS-e820: 00000000bffdc000 - 00000000c0000000 (reserved)
BIOS-e820: 00000000feffc000 - 00000000ff000000 (reserved)
BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
BIOS-e820: 0000000100000000 - 0000000240000000 (usable)
SMBIOS version 2.8 @ 0xF6340
SMBIOS 2.8 present.
DMI: RDO OpenStack Compute, BIOS 1.11.0-2.el7 04/01/2014
Hypervisor detected: KVM
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x240000 max_arch_pfn = 0x400000000
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
last_pfn = 0xbffdc max_arch_pfn = 0x400000000
initial memory mapped : 0 - 20000000
Using GB pages for direct mapping
init_memory_mapping: 0000000000000000-00000000bffdc000
0000000000 - 0080000000 page 1G
0080000000 - 00bfe00000 page 2M
00bfe00000 - 00bffdc000 page 4k
kernel direct mapping tables up to bffdc000 @ 8000-b000
Use unified mapping for non-reserved e820 regions.
init_memory_mapping: 0000000100000000-0000000240000000
0100000000 - 0240000000 page 1G
kernel direct mapping tables up to 240000000 @ a000-b000
RAMDISK: 36b25000 - 37fef67b
ACPI: Deleted _OSI(Windows 2012)
ACPI: Deleted _OSI(Windows 2013)
ACPI: RSDP 00000000000f6310 00014 (v00 BOCHS )
ACPI: RSDT 00000000bffe13cd 00030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001)
ACPI: FACP 00000000bffe11e1 00074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001)
ACPI: DSDT 00000000bffdfd00 014E1 (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001)
ACPI: FACS 00000000bffdfcc0 00040
ACPI: APIC 00000000bffe1255 00090 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001)
ACPI: SRAT 00000000bffe12e5 000E8 (v01 BOCHS BXPCSRAT 00000001 BXPC 00000001)
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
SRAT: PXM 0 -> APIC 0 -> Node 0
SRAT: PXM 0 -> APIC 1 -> Node 0
SRAT: PXM 0 -> APIC 2 -> Node 0
SRAT: PXM 0 -> APIC 3 -> Node 0
SRAT: Node 0 PXM 0 0-a0000
SRAT: Node 0 PXM 0 100000-c0000000
SRAT: Node 0 PXM 0 100000000-240000000
NUMA: Allocated memnodemap from a000 - e840
NUMA: Using 20 for the hash shift.
Bootmem setup node 0 0000000000000000-0000000240000000
NODE_DATA [000000000000e840 - 000000000004283f]
bootmap [0000000000043000 - 000000000008afff] pages 48
(8 early reservations) ==> bootmem [0000000000 - 0240000000]
#0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
#1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
#2 [0001000000 - 0002045964] TEXT DATA BSS ==> [0001000000 - 0002045964]
#3 [0036b25000 - 0037fef67b] RAMDISK ==> [0036b25000 - 0037fef67b]
#4 [000009fc00 - 0000100000] BIOS reserved ==> [000009fc00 - 0000100000]
#5 [0002046000 - 00020460fd] BRK ==> [0002046000 - 00020460fd]
#6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
#7 [000000a000 - 000000e840] MEMNODEMAP ==> [000000a000 - 000000e840]
found SMP MP-table at [ffff8800000f6360] f6360
Found 129MB of memory at 48MB for crashkernel auto
Reserving 129MB of memory at 48MB for crashkernel (System RAM: 9216MB)
kvm-clock: Using msrs 4b564d01 and 4b564d00
kvm-clock: cpu 0, msr 0:1c39e41, boot clock
[ffffea0000000000-ffffea0007dfffff] PMD -> [ffff880028600000-ffff88002f5fffff] on node 0
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
DMA32 0x00001000 -> 0x00100000
Normal 0x00100000 -> 0x00240000
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x0000009f
0: 0x00000100 -> 0x000bffdc
0: 0x00100000 -> 0x00240000
On node 0 totalpages: 2097018
DMA zone: 56 pages used for memmap
DMA zone: 105 pages reserved
DMA zone: 3837 pages, LIFO batch:0
DMA32 zone: 14280 pages used for memmap
DMA32 zone: 768020 pages, LIFO batch:31
Normal zone: 17920 pages used for memmap
Normal zone: 1292800 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x608
ACPI: Local APIC address 0xfee00000
Setting APIC routing to flat.
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level)
ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ5 used by override.
ACPI: IRQ9 used by override.
ACPI: IRQ10 used by override.
ACPI: IRQ11 used by override.
Using ACPI (MADT) for SMP configuration information
SMP: Allowing 4 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 24
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
PM: Registered nosave memory: 00000000bffdc000 - 00000000c0000000
PM: Registered nosave memory: 00000000c0000000 - 00000000feffc000
PM: Registered nosave memory: 00000000feffc000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 00000000fffc0000
PM: Registered nosave memory: 00000000fffc0000 - 0000000100000000
Allocating PCI resources starting at c0000000 (gap: c0000000:3effc000)
Booting paravirtualized kernel on KVM
NR_CPUS:4096 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
PERCPU: Embedded 31 pages/cpu @ffff880028200000 s96600 r8192 d22184 u524288
pcpu-alloc: s96600 r8192 d22184 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3
kvm-clock: cpu 0, msr 0:28216e41, primary cpu clock
kvm-stealtime: cpu 0, msr 2820ed00
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2064657
Policy zone: Normal
Kernel command line: ro root=/dev/mapper/vg_rrxserver-vg_rrxserver_lv_root rd_LVM_LV=vg_rrxserver/vg_rrxserver_lv_root rd_NO_LUKS rd_LVM_LV=vg_rrxserver/vg_rrxserver_lv_swap rd_NO_MD SYSFONT=latarcyrheb-sun16 crashkernel=129M@48M KEYBOARDTYPE=pc KEYTABLE=us rd_NO_DM LANG=en_US.UTF-8 rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
x86/fpu: xstate_offset[2]: 0240, xstate_sizes[2]: 0100
xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
Memory: 8036260k/9437184k available (5468k kernel code, 1049112k absent, 351812k reserved, 6953k data, 1316k init)
Hierarchical RCU implementation.
NR_IRQS:33024 nr_irqs:440
Console: colour VGA+ 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Detected 2299.998 MHz processor.
Calibrating delay loop (skipped) preset value.. 4599.99 BogoMIPS (lpj=2299998)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
mce: CPU supports 10 MCE banks
alternatives: switching to unfair spinlock
ACPI: Core revision 20090903
ftrace: converting mcount calls to 0f 1f 44 00 00
ftrace: allocating 21967 entries in 87 pages
Enabling x2apic
Enabled x2apic
APIC routing finalized to physical x2apic.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Xeon(R) CPU E5-2670 v3 @ 2.30GHz stepping 02
Performance Events: 16-deep LBR, Haswell events, Intel PMU driver.
... version: 2
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog disabled (cpu0): hardware events not enabled
Booting Node 0, Processors #1
kvm-clock: cpu 1, msr 0:28296e41, secondary cpu clock
kvm-stealtime: cpu 1, msr 2828ed00
#2
kvm-clock: cpu 2, msr 0:28316e41, secondary cpu clock
kvm-stealtime: cpu 2, msr 2830ed00
#3 Ok.
kvm-clock: cpu 3, msr 0:28396e41, secondary cpu clock
kvm-stealtime: cpu 3, msr 2838ed00
Brought up 4 CPUs
Total of 4 processors activated (18399.98 BogoMIPS).
sizeof(vma)=200 bytes
sizeof(page)=56 bytes
sizeof(inode)=592 bytes
sizeof(dentry)=192 bytes
sizeof(ext3inode)=800 bytes
sizeof(buffer_head)=104 bytes
sizeof(skbuff)=232 bytes
sizeof(task_struct)=2672 bytes
devtmpfs: initialized
regulator: core version 0.5
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: Using configuration type 1 for base access
NMI watchdog disabled (cpu0): hardware events not enabled
PMU erratum BJ122, BV98, HSD29 workaround disabled, HT off
bio: create slab at 0
ACPI: EC: Look up EC in DSDT
ACPI: Interpreter enabled
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
pci_root PNP0A03:00: host bridge window [mem 0xc0000000-0xfebfffff]
pci_root PNP0A03:00: host bridge window [mem 0x240000000-0x2bfffffff]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: root bus resource [mem 0x240000000-0x2bfffffff]
pci 0000:00:01.1: reg 20: [io 0xc0a0-0xc0af]
pci 0000:00:01.2: reg 20: [io 0xc040-0xc05f]
pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI
pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB
pci 0000:00:02.0: reg 10: [mem 0xfc000000-0xfdffffff pref]
pci 0000:00:02.0: reg 14: [mem 0xfebd0000-0xfebd0fff]
pci 0000:00:02.0: reg 30: [mem 0xfebc0000-0xfebcffff pref]
pci 0000:00:03.0: reg 10: [io 0xc060-0xc07f]
pci 0000:00:03.0: reg 14: [mem 0xfebd1000-0xfebd1fff]
pci 0000:00:03.0: reg 20: [mem 0xfe000000-0xfe003fff 64bit pref]
pci 0000:00:03.0: reg 30: [mem 0xfeb80000-0xfebbffff pref]
pci 0000:00:04.0: reg 10: [io 0xc000-0xc03f]
pci 0000:00:04.0: reg 14: [mem 0xfebd2000-0xfebd2fff]
pci 0000:00:04.0: reg 20: [mem 0xfe004000-0xfe007fff 64bit pref]
pci 0000:00:05.0: reg 10: [io 0xc080-0xc09f]
pci 0000:00:05.0: reg 20: [mem 0xfe008000-0xfe00bfff 64bit pref]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11)
ACPI: PCI Interrupt Link [LNKS] (IRQs *9)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: old code would have set cacheline size to 32 bytes, but clflush_size = 64
PCI: pci_cache_line_size set to 64 bytes
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
Switching to clocksource kvm-clock
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
pnp 00:01: [io 0x0070-0x0071]
pnp 00:01: [irq 8]
pnp 00:01: [io 0x0072-0x0077]
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [io 0x0060]
pnp 00:02: [io 0x0064]
pnp 00:02: [irq 1]
pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:03: [irq 12]
pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
pnp 00:04: [io 0x03f2-0x03f5]
pnp 00:04: [io 0x03f7]
pnp 00:04: [irq 6]
pnp 00:04: [dma 2]
pnp 00:04: Plug and Play ACPI device, IDs PNP0700 (active)
pnp 00:05: [io 0x03f8-0x03ff]
pnp 00:05: [irq 4]
pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:06: [io 0xaf00-0xaf0b]
pnp 00:06: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:07: [io 0xafe0-0xafe3]
pnp 00:07: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp 00:08: [io 0xae00-0xae13]
pnp 00:08: Plug and Play ACPI device, IDs PNP0a06 (active)
pnp: PnP ACPI: found 9 devices
ACPI: ACPI bus type pnp unregistered
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:00: resource 8 [mem 0x240000000-0x2bfffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 262144 (order: 9, 2097152 bytes)
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP reno registered
NET: Registered protocol family 1
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: PIIX3: Enabling Passive Release
pci 0000:00:01.0: Activating ISA DMA hang workarounds
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
pci 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
pci 0000:00:01.2: PCI INT D disabled
pci 0000:00:02.0: Boot video device
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 21289k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
Placing 64MB software IO TLB between ffff880020000000 - ffff880024000000
software IO TLB at phys 0x20000000 - 0x24000000
sha256_ssse3: Using AVX optimized SHA-256 implementation
futex hash table entries: 1024 (order: 4, 65536 bytes)
audit: initializing netlink socket (disabled)
type=2000 audit(1547697075.693:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15737
SELinux: Registering netfilter hooks
ksign: Installing public key data
Loading keyring
- Added public key DB7F2EF9948C0DF
- User ID: CentOS (Kernel Module GPG key)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
acpiphp: Slot [3] registered
acpiphp: Slot [4] registered
acpiphp: Slot [5] registered
acpiphp: Slot [6] registered
acpiphp: Slot [7] registered
acpiphp: Slot [8] registered
acpiphp: Slot [9] registered
acpiphp: Slot [10] registered
acpiphp: Slot [11] registered
acpiphp: Slot [12] registered
acpiphp: Slot [13] registered
acpiphp: Slot [14] registered
acpiphp: Slot [15] registered
acpiphp: Slot [16] registered
acpiphp: Slot [17] registered
acpiphp: Slot [18] registered
acpiphp: Slot [19] registered
acpiphp: Slot [20] registered
acpiphp: Slot [21] registered
acpiphp: Slot [22] registered
acpiphp: Slot [23] registered
acpiphp: Slot [24] registered
acpiphp: Slot [25] registered
acpiphp: Slot [26] registered
acpiphp: Slot [27] registered
acpiphp: Slot [28] registered
acpiphp: Slot [29] registered
acpiphp: Slot [30] registered
acpiphp: Slot [31] registered
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
[Firmware Bug]: No valid trip found
GHES: HEST is not enabled!
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
crash memory driver: version 1.1
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
brd: module loaded
loop: module loaded
input: Macintosh mouse button emulation as /devices/virtual/input/input1
Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:01.2: PCI INT D -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
uhci_hcd 0000:00:01.2: setting latency timer to 64
uhci_hcd 0000:00:01.2: UHCI Host Controller
uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:01.2: irq 11, io base 0x0000c040
usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.32-696.16.1.el6.x86_64 uhci_hcd
usb usb1: SerialNumber: 0000:00:01.2
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
rtc0: alarms up to one day, y3k, 114 bytes nvram
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver hiddev
usbcore: registered new interface driver usbhid
usbhid: v2.6:USB HID core driver
GRE over IPv4 demultiplexor driver
TCP cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
registered taskstats version 1
rtc_cmos 00:01: setting system clock to 2019-01-17 03:51:17 UTC (1547697077)
Initalizing network drop monitor service
Freeing unused kernel memory: 1316k freed
Write protecting the kernel read-only data: 10240k
Freeing unused kernel memory: 656k freed
Freeing unused kernel memory: 1548k freed
dracut: dracut-004-409.el6_8.2
dracut: rd_NO_LUKS: removing cryptoluks activation
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.33.1-ioctl (2015-8-18) initialised: dm-devel@redhat.com
udev: starting version 147
dracut: Starting plymouth daemon
usb 1-1: new full speed USB device number 2 using uhci_hcd
dracut: rd_NO_DM: removing DM RAID activation
dracut: rd_NO_MD: removing MD RAID activation
ata_piix 0000:00:01.1: version 2.13
ata_piix 0000:00:01.1: setting latency timer to 64
scsi0 : ata_piix
scsi1 : ata_piix
ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc0a0 irq 14
ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc0a8 irq 15
usb 1-1: New USB device found, idVendor=0627, idProduct=0001
usb 1-1: New USB device strings: Mfr=1, Product=3, SerialNumber=5
usb 1-1: Product: QEMU USB Tablet
usb 1-1: Manufacturer: QEMU
usb 1-1: SerialNumber: 42
usb 1-1: configuration #1 chosen from 1 choice
input: QEMU QEMU USB Tablet as /devices/pci0000:00/0000:00:01.2/usb1/1-1/1-1:1.0/input/input3
generic-usb 0003:0627:0001.0001: input,hidraw0: USB HID v0.01 Mouse [QEMU QEMU USB Tablet] on usb-0000:00:01.2-1/input0
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
virtio-pci 0000:00:03.0: PCI INT A -> Link[LNKC] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:03.0: setting latency timer to 64
virtio-pci 0000:00:04.0: PCI INT A -> Link[LNKD] -> GSI 11 (level, high) -> IRQ 11
virtio-pci 0000:00:04.0: setting latency timer to 64
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10
virtio-pci 0000:00:05.0: PCI INT A -> Link[LNKA] -> GSI 10 (level, high) -> IRQ 10
virtio-pci 0000:00:05.0: setting latency timer to 64
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
alloc irq_desc for 24 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 24 for MSI/MSI-X
alloc irq_desc for 25 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:04.0: irq 25 for MSI/MSI-X
vda: vda1 vda2
dracut: Scanning devices vda2 for LVM logical volumes vg_rrxserver/vg_rrxserver_lv_root vg_rrxserver/vg_rrxserver_lv_swap
dracut: inactive '/dev/vg_rrxserver/vg_rrxserver_lv_swap' [4.10 GiB] inherit
dracut: inactive '/dev/vg_rrxserver/vg_rrxserver_lv_root' [45.41 GiB] inherit
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts:
dracut: Mounted root filesystem /dev/mapper/vg_rrxserver-vg_rrxserver_lv_root
SELinux: Disabled at runtime.
SELinux: Unregistering netfilter hooks
type=1404 audit(1547697078.865:2): selinux=0 auid=4294967295 ses=4294967295
dracut:
dracut: Switching root
udev: starting version 147
piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0
alloc irq_desc for 26 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 26 for MSI/MSI-X
alloc irq_desc for 27 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 27 for MSI/MSI-X
alloc irq_desc for 28 on node -1
alloc kstat_irqs on node -1
virtio-pci 0000:00:03.0: irq 28 for MSI/MSI-X
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x1
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x1
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x1
platform microcode: firmware: requesting intel-ucode/06-3f-02
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x1
platform microcode: firmware: requesting intel-ucode/06-3f-02
Microcode Update Driver: v2.00 , Peter Oruba
EXT4-fs (vda1): mounted filesystem with ordered data mode. Opts:
Adding 4296700k swap on /dev/mapper/vg_rrxserver-vg_rrxserver_lv_swap. Priority:-1 extents:1 across:4296700k